Wednesday, March 6, 2013

Well,the weather in Maryland sucks right now. I've been making the frame for the fuel cell & battery,which will go in the trunk area,and be bolted down to the body mounting points.
Here's a  bottom view from the Battery hold down side down to the other side

This is what the system looks like complete

The system is very rigid and should move or vibrate when it will be bolted down.Here are a couple flicks of the setup.It is made of square tubing with cross bracing.
The fuel cell itself is a twenty gallon system measuring approx, 24 /1/2 x 20 . Its an RCI unit.

No comments:

Post a Comment